EC (Easy Connect) Casing is an ABS inclinometer casing manufactured to 3 metre lengths, using advanced extrusion techniques developed in the UK. The result is an accurate groove profile equivalent to broached casing.
Designed to replace traditional inclinometer casing, EC Casing is both faster and easier to install.
EC Casing can be extended or joined at any point along its length; telescoping couplings can also be installed to cope with significant settlement or heave.
Each order of EC Casing is supplied with a laminated installation guide.
Extremely simple installation, no rivets, tape or glue. Just push together and the joint is made.

Significantly faster installation, typically 45 minutes quicker than traditional casing for a 30 metre borehole.
More installations with less materials.
Consistent, reliable joints - The machined slot ensures consistent keyway alignment for accurate data.
Watertight - An ‘O’ ring on each joint prevents ingress of water or grout, better long term data.
Low spiral, deep tight groove profile, more accurate data.
Joint tested to ensure resistance to collapse (pressure) and twist (spiral).
Significant savings in installation time reduces both labour cost and drill rig standby charges.

Click here to open datasheet.

▲Back to top